Universal Tap Connector Adapter Mixer Kitchen Garden Hose Pipe Joiner Fitting-BL

Happy with my tap to hose connector. Fits easily and no more water squirting everywhere. Brilliant little item.

The media could not be loaded. Arrived well packaged and with fast delivery a tap connector which i needed to install in my kitchen so I can connect my garden hose and wet the garden or wash the car.As soon as it came I tried it and was very easy to apply it on the tap, pull down the orange flap and when i turn on the watter it worked perfectly. No dripping, no leaking.I am very happy with this purchase.I would highly recommend it.

I read the somewhat mixed reviews on this...and how it has damaged taps etc. This wasnt really an issue for me because my taps are old anyway.The device doesnt fit all taps...wouldlnt go on my bathroom taps, but fitted fine on the kitchen ones.The key is to get the white washer FLUSH on your tap to prevent leaks...and not to tighten it too much...a little trial and error is the way to go. I need it to water my patio plants and it works fine. Its a cheap product and therefore I`d say good value. I`d Recommend

Absolutely brilliant, fits paddle tap perfectly to connect to hosepipe been looking for months for something like this couldn,t be more pleased would definately recommend this item

Sadly didn't fit our mixer tap it was too small, great product for a single tap

I have never rushed so quickly to make a review. This is excellent! I have spent so much money on other similar products for an attachment for my kitchen tap over the last three years, all of which were a waste. I was doubtful but thought i would try it as the cost is so reasonable. I was able to attach it straight away to my tap with no adjustments, it was with slight force, but without it water would seep out. Once on which took seconds it worked perfectly! So pleased i can water my plants with a hose as opposed to copious treks with watering cans. I am leaving it on now throughout the summer for ease, but would have no concerns in reattaching. Absolutely worth purchasing!

I have a water-bed and I wanted a simple way to connect a hose to one of the bathroom taps, for topping up the bed from time to time.I have an old adaptor with a frame that fits over the tap like this one does, but it has a threaded rod that screws down to push on the top of the tap-spout (like a cider-press). It is only a small diameter and if the tap spout is not flat, it was difficult to get it mounted firmly and without leaking. It has a soft-rubber seal that mates up against the water outlet on the underside of the tap, and over time this has become cut and distorted, and does not seal well.This new adaptor has been excellent. I have been able to use it successfully on taps both with a flat top to the spout and a curved top.To install it, first back-out the lower section that has the hose quick connect, and lift the orange flap. Then slide the adaptor over your tap and screw the lower section in until the whit seal is lightly touching the water outlet on the lower side of the tap. Lower the orange flap. And screw the lower section in a little tighter.I tested it quickly by turning on the tap before attaching the hose. If it leaks at this stage, turn off the tap. Lift the orange flap, and tighten the lower section 1/8 of a turn more. At the same time look closely at how the white seal is aligned to the underside of the spout, make sure it is flush. Lower the flap.I have found this to be quick and simple to do. It has taken me much longer to write this than to actually do it and get a good seal.Note: I have seen some other reviews mention that they crushed their tap with this device. I can see how that could happen if you tighten the lower section against the tap to the maximum that you possible can, and THEN lower the flap - the leverage via the cam could be enough to crush the tap. It does NOT need to be tightened so much (mind you, some cheap modern taps are quite thin and fragile).If you are seeing leaks, look at the alignment and do not blindly tighten the adaptor. Once you have finished, and closed the tap, lift the flap and back off the lower section 1/4 to 1/2 a turn.I am very happy with this adaptor.Edit 19 April 2020: I have used this adaptor now almost 10 times. After the first two, I can now get this on a tap and aligned so that it does not leak, at the first attempt.Still very happy with it.

Packaging & Build QualityThe product arrived in simple black plastic packaging. While there were no additional attachments, I already had compatible parts from previous kits, so this wasn't an issue. The adapter itself feels surprisingly sturdy. It's made from good-quality material that doesn’t feel flimsy or prone to breakage, reassuring for something used so frequently.InstallationInstalling the adapter onto my kitchen tap was straightforward. I didn’t encounter any difficulties, and it fits snugly with no need for extra tools or accessories. The universal design seems versatile enough for most standard taps, and it integrated smoothly with my garden hose.PerformanceThe most important aspect of this adapter is how well it performs, and it certainly met my expectations. I tested it at full water pressure, and there were no signs of leaking around the tap. The tight seal it provides ensures that water flows directly into the hose without any wastage or splashing.Pros:Durable Material: The sturdy build gives me confidence that this will last through many uses.Leak-Free Performance: No leaks even when the water is fully switched on.Easy to Install: Fits well with no complicated steps involved.Good Value: Given the quality, it feels worth the price.Cons:No Additional Attachments: While it worked for me, having extra attachments might be useful for people without compatible parts already.Overall VerdictThis Universal Tap Connector Adapter is an excellent choice for those who need a solid, no-fuss solution for connecting a garden hose to their kitchen tap. Its durability and leak-proof performance stand out, making it a great addition to your home setup.Highly recommended for anyone looking for a reliable and affordable tap adapter!